cuecardconverter.com
EN

Language

Region

Menu

Online teleprompter

Last updated: 14 November 2026

Paste a speech or host script and let it scroll past a reading line at the pace you speak. The speed is set in words per minute, the same unit as the speech time calculator, so the scroll ends when your speaking time ends. The text stays in your browser.

130 words/min
48 px
Words0
Reading time0 s

In the teleprompter: Space starts and pauses, ↑ and ↓ change the speed, ← and → move the text back or forward by five seconds, + and − change the text size, M mirrors, F is full screen and Esc closes. On a touch screen, tap the text to start or pause and drag it to move.

Turn this text into cue cards → Check sentence length →

How the scroll speed is set

Many teleprompters ask for a speed on a scale such as 1 to 10 and leave you to find the right one by trial. This one asks for your speaking pace. It counts the words in your script, divides them by the pace and moves the text at a steady rate so that the last line reaches the reading line when that time is up. A 650-word script at 130 words a minute scrolls for five minutes.

We timed it. A 197-word host script at 130 words a minute should take 90.9 seconds and reached the end in 90.9 seconds. A 369-word speech at 110 words a minute should take 201.3 seconds and took 201.4. Both were measured in Chrome on a laptop-sized window, from pressing Space to the last line.

If you do not know your pace, use the speaking speed test on the speech time calculator. It times you reading a short passage aloud and gives the result in the same unit.

Text size: how much you see at once

Larger text is easier to read from a distance, but fewer words fit on the screen and each line passes faster. The table shows what the teleprompter displays at four text sizes on three screens. It was measured with a 1,355-word speech (John F. Kennedy’s 1961 inaugural address) at 130 words a minute.

ScreenText sizeWords per lineLines on screenWords on screenSeconds per line
Laptop, 1366 × 76832 px9.115.31393.6
Laptop, 1366 × 76848 px8.310.2853.4
Laptop, 1366 × 76864 px6.37.7482.6
Laptop, 1366 × 76880 px5.06.1312.1
Tablet, 1024 × 76832 px9.115.31393.6
Tablet, 1024 × 76848 px6.310.2642.6
Tablet, 1024 × 76864 px4.67.7362.0
Tablet, 1024 × 76880 px3.76.1221.6
Phone, 390 × 844 (upright)32 px3.515.6551.5
Phone, 390 × 844 (upright)48 px2.210.4231.0
Phone, 390 × 844 (upright)64 px1.67.8120.7
Phone, 390 × 844 (upright)80 px1.36.380.6

On a laptop two or three steps away, 64 px still gives you six words on a line and more than two seconds to read it. On an upright phone, even 48 px leaves about two words on a line and one second for each, which is hard to follow. On a phone, stay near 32 px, or turn it sideways so the lines get longer. The text column is never wider than 28 times the text size, which is why 32 px gives the same result on the laptop and the tablet.

The reading line

The two short marks at the edges of the screen show the reading line. It sits 38% of the way down, so you see a few lines that have passed and more of what is coming. Read the line between the marks and let the text come to you. If you look further down to read ahead, your eyes move away from the camera and the audience notices.

Put the screen as close to the camera lens as you can, or directly under it. The further the screen is from the lens, the more it shows that you are reading.

When to use mirror mode

Mirror mode flips the text left to right. You need it only with teleprompter glass: a tablet or phone lies flat under a sheet of angled glass in front of the camera, and the glass reflects the screen towards you. A reflection is reversed, so the text on the screen has to be reversed first. If you read straight from the screen, leave mirror mode off.

Stage cues and blank lines

Anything in square brackets, such as [PAUSE] or [VIDEO], is shown in a dimmer colour so you do not read it out. Bracketed cues are still counted as words in the scroll time, so a script with many cues runs a little longer than your speaking time. A blank line in your script stays a blank line on the screen and gives you a place to breathe.

The scroll pauses when you switch to another tab or window and continues from the same place when you come back. While the teleprompter is open, the screen stays on in browsers that support it.

Teleprompter or cue cards?

A teleprompter suits a speech that must be word for word and is delivered from one spot to a camera. Cue cards suit a host who moves, a programme that changes during the event or a room without a screen in the speaker’s sightline. The guide teleprompter vs cue cards compares the two. To have both, turn the same script into cards with the cue card converter and keep them in your hand as a backup.

Frequently asked questions

Is my script uploaded anywhere?

No. The teleprompter runs in your browser and the script is not sent to a server. Only the speed, text size and mirror setting are saved in this browser for your next visit. The script itself is not saved.

What scroll speed should I use?

Use your own speaking pace in words per minute. The speech time calculator gives 120 to 140 as a normal pace for most presentations, and its speaking speed test on the speech time calculator measures yours in under a minute.

Can I change the speed while it is scrolling?

Yes. The up and down arrow keys change the pace by 5 words a minute, and the Slower and Faster buttons do the same. The left and right arrows move the text back or forward by five seconds.

Does it work on a phone or tablet?

Yes. Tap the text to start or pause and drag it to move back or forward. On an upright phone keep the text near 32 px, because larger sizes leave only one or two words on a line.

Does the timing include pauses?

No. The scroll time is the word count divided by your pace. Press Space to pause for applause or a video, and press it again to continue.

More free tools

Related guides

← Back to the cue card converter